HG Windows & Doors

Thermally broken aluminium awning window assembly, top-hinged outward opening, with Low-E double glazed insulating glass unit (DGU) filled with argon gas. Customised to individual client specifications including dimensions and glass type.

Intended use: External windows for residential and light commercial buildings. Suitable for timber-framed buildings per NZS 3604:2011 or specifically designed per B1/VM1. Certified for Extra High wind zones and any exposure zone except microclimates.

Product Identifier: HG-TBAW-001 to HG-TBAW-006 / HGTR-TBAW

This product holds CodeMark Product Certificate CMNZ70173, issued under section 19(1)(d) of the Building Act 2004 by Bureau Veritas Australia Pty Ltd (JAS-ANZ accredited). BCAs are legally required to accept this certificate as establishing compliance with the relevant clauses of the New Zealand Building Code. The product is tested to SNZ TS 4211:2022 (window classification), with glazing certified to AS/NZS 2208:2023 (safety glazing) and NZS 4223.2:2016 (insulating glass units) under CSi PAS-Mark Licence #7564. Thermal performance is independently verified by BRANZ (Report DC17865-02-001).

NZBC Clauses

B1 Structure (B1.3.1, B1.3.2, B1.3.3(a,h,j), B1.3.4)B2 Durability (B2.3.1(b), B2.3.1(c) for hardware)E2 External Moisture (E2.3.2, E2.3.7)F2 Hazardous Building Materials (F2.3.1, F2.3.2, F2.3.3)G4 Ventilation (contributes to G4.3.1, G4.3.3)G7 Natural Light (contributes to G7.3.1, G7.3.2)H1 Energy Efficiency (contributes to H1.3.1, H1.3.2E)

Test / Property	Result / Value
Wind Resistance (SLS)	1515 Pa -- Extra High (EH)
Wind Resistance (ULS)	2500 Pa -- EM 7
Water Penetration Resistance	291 Pa -- H (Non-exposed)
Thermal Performance (R-value)	R0.46 (average houselot, BRANZ DC17865-02-001)
Centre of Glazing U-value	1.66 W/m²K (for R0.46 target)
Visible Light Transmittance	80% (Low-E XETB0180, ISO 9050:2003)
Glass Certification	CSi PAS-Mark Licence #7564 -- AS/NZS 2208:2023, NZS 4223.2:2016
Profile Alloy	6063-T5 powder coated (min 82 μm, SDBZ-JZ2409063)

Model ID	Max Frame Size (W x H)
HG001_TBAW_1M	1340 × 1400 mm
HG002_TBAW_2FM	2400 × 1640 mm (sash 1020 × 1640)
HG003_TBAW_1F	2040 × 2040 mm
HG004_TBAW_3M/FM	2440 × 1640 mm
HG005_TBAW_3MM/F	2240 × 1840 mm
HG006_TBAW_3F/MM	2240 × 1840 mm
HGTR_TBAW_6MF/FF/MF	3040 × 2145 mm

Downloads & Documentation

CodeMark Certificate CMNZ70173

Full CodeMark product certificate issued by Bureau Veritas

CSi Certificate C1 -- AS/NZS 2208:2023

Safety glazing certification

CSi Certificate C2 -- NZS 4223.2:2016

Insulating glass unit certification

CSi Certificate C3 -- SNZ TS 4211:2022

Product classification certificate

BRANZ Thermal Report DC17865-02-001

R0.46 thermal performance verification

Product Compliance Schedule S5

CSi compliance schedule for awning window

Installation Manual Rev 1.0

Required for warranty coverage -- install strictly per manual

Get a Quote for This Product

Upload your building consent drawings and we'll prepare a detailed quote including this product.

Upload Plans & Quote

Thermal Break Quality

Technoform thermal break strips -- the same polyamide PA66 GF25 insulating barrier used by leading European window manufacturers. We don't cut corners on the component that matters most for thermal performance.

Technoform Group · Germany · ISO 9001 certified

Certifications

CodeMark CMNZ70173

Bureau Veritas -- BCAs must accept

CSi PAS-Mark #7564

JAS-ANZ accredited, ISO/IEC 17065

BRANZ Tested

Independent thermal performance

ISO 9001

Quality management system

View all certifications

Verify CodeMark Certificate CMNZ70173 on the MBIE Register of Product Certificates:

building.govt.nz

HG Thermal Awning Windows (TBAW Series)

Downloads & Documentation

Get a Quote for This Product

Certifications